80W UV MODULE UNIT
The radiation from ultraviolet light at 2537 angstroms provided inside the
Lifegard Ultraviolet Sterilizer exerts a lethal effect on micro-organisms.
UV light alters genetic material within the cells, which interrupts respiration.
UV light, when used properly, is extremely beneficial in destroying disease causing pathogens as they pass through the unit.
UV sterilization is an effective method of disease control.
Splash Boot creates water resistant seal around electrical connection.
Unique 4-pin connector design for easy bulb replacement without shutting down the system.
UV Bulb of highest quality pure hard quartz material allows maximum UV transmission and longer
bulb life.
End cap wire design drops bulb further into unit for maximum output and keeps
heat away from sealing area.
10, 25 or 40 Watt UL listed Ballast, (230V, 50Hz ballast available)
Compression Coupling & Gasket seals quartz sleeve to cap.
Test tube style quartz sleeve isolates UV bulb from water contact allowing it to operate at the optimum bulb temperature for maximum UV output. Highest quality pure hard quartz material allows maximum UV transmission.
Replaceable Internal Overflow Pipe automatically vents air from chamber and directs 100% of the water flow past UV light
Sleeve Guide guides quartz sleeve into proper position for accurate assembly.
Replaceable Inner Protective Sleeve protects outer housing from long term UV damage. Acts as an internal reflector maximizing UV efficiency.
Modular Construction allows simple connection to any Lifegard Modular filter system or outside canister filter.
Solid cap features Clear View Port to allow visable light (no UV) to pass through and indicate bulb is operating.
- 1.25" FPT
- 45.25" H / 75.25" maintenance clearance
- 3000 GPH Max Flow
40WATT U.V. MODULE
The radiation from ultraviolet light at 2537 angstroms provided inside the
Lifegard Ultraviolet Sterilizer exerts a lethal effect on micro-organisms.
UV light alters genetic material within the cells, which interrupts respiration.
UV light, when used properly, is extremely beneficial in destroying disease causing pathogens as they pass through the unit.
UV sterilization is an effective method of disease control.
Splash Boot creates water resistant seal around electrical connection.
Unique 4-pin connector design for easy bulb replacement without shutting down the system.
UV Bulb of highest quality pure hard quartz material allows maximum UV transmission and longer
bulb life.
End cap wire design drops bulb further into unit for maximum output and keeps
heat away from sealing area.
10, 25 or 40 Watt UL listed Ballast, (230V, 50Hz ballast available)
Compression Coupling & Gasket seals quartz sleeve to cap.
Test tube style quartz sleeve isolates UV bulb from water contact allowing it to operate at the optimum bulb temperature for maximum UV output. Highest quality pure hard quartz material allows maximum UV transmission.
Replaceable Internal Overflow Pipe automatically vents air from chamber and directs 100% of the water flow past UV light
Sleeve Guide guides quartz sleeve into proper position for accurate assembly.
Replaceable Inner Protective Sleeve protects outer housing from long term UV damage. Acts as an internal reflector maximizing UV efficiency.
Modular Construction allows simple connection to any Lifegard Modular filter system or outside canister filter.
Solid cap features Clear View Port to allow visable light (no UV) to pass through and indicate bulb is operating.
- Ports 1.25" slip or 3/4" FPT
- 35.5" H / 64.5" maintenance clearance
- 1500 GPH Max Flow
25WATT U.V. MODULE
The radiation from ultraviolet light at 2537 angstroms provided inside the
Lifegard Ultraviolet Sterilizer exerts a lethal effect on micro-organisms.
UV light alters genetic material within the cells, which interrupts respiration.
UV light, when used properly, is extremely beneficial in destroying disease causing pathogens as they pass through the unit.
UV sterilization is an effective method of disease control.
Splash Boot creates water resistant seal around electrical connection.
Unique 4-pin connector design for easy bulb replacement without shutting down the system.
UV Bulb of highest quality pure hard quartz material allows maximum UV transmission and longer
bulb life.
End cap wire design drops bulb further into unit for maximum output and keeps
heat away from sealing area.
10, 25 or 40 Watt UL listed Ballast, (230V, 50Hz ballast available)
Compression Coupling & Gasket seals quartz sleeve to cap.
Test tube style quartz sleeve isolates UV bulb from water contact allowing it to operate at the optimum bulb temperature for maximum UV output. Highest quality pure hard quartz material allows maximum UV transmission.
Replaceable Internal Overflow Pipe automatically vents air from chamber and directs 100% of the water flow past UV light
Sleeve Guide guides quartz sleeve into proper position for accurate assembly.
Replaceable Inner Protective Sleeve protects outer housing from long term UV damage. Acts as an internal reflector maximizing UV efficiency.
Modular Construction allows simple connection to any Lifegard Modular filter system or outside canister filter.
Solid cap features Clear View Port to allow visable light (no UV) to pass through and indicate bulb is operating.
- Ports 1.25" slip or 3/4" FPT
- 26.75" H / 42.75" maintenance clearance
- 760 GPH Max Flow
10WATT U.V. MODULE
The radiation from ultraviolet light at 2537 angstroms provided inside the
Lifegard Ultraviolet Sterilizer exerts a lethal effect on micro-organisms.
UV light alters genetic material within the cells, which interrupts respiration.
UV light, when used properly, is extremely beneficial in destroying disease causing pathogens as they pass through the unit.
UV sterilization is an effective method of disease control.
Splash Boot creates water resistant seal around electrical connection.
Unique 4-pin connector design for easy bulb replacement without shutting down the system.
UV Bulb of highest quality pure hard quartz material allows maximum UV transmission and longer
bulb life.
End cap wire design drops bulb further into unit for maximum output and keeps
heat away from sealing area.
10, 25 or 40 Watt UL listed Ballast, (230V, 50Hz ballast available)
Compression Coupling & Gasket seals quartz sleeve to cap.
Test tube style quartz sleeve isolates UV bulb from water contact allowing it to operate at the optimum bulb temperature for maximum UV output. Highest quality pure hard quartz material allows maximum UV transmission.
Replaceable Internal Overflow Pipe automatically vents air from chamber and directs 100% of the water flow past UV light
Sleeve Guide guides quartz sleeve into proper position for accurate assembly.
Replaceable Inner Protective Sleeve protects outer housing from long term UV damage. Acts as an internal reflector maximizing UV efficiency.
Modular Construction allows simple connection to any Lifegard Modular filter system or outside canister filter.
Solid cap features Clear View Port to allow visable light (no UV) to pass through and indicate bulb is operating.
- Ports 1.25" slip or 3/4" FPT
- 17" H / 27" maintenance clearance
- 240 GPH Max Flow